日本一区二区在免费观看

          1. Skip navigation Accessibility information

            Index of Materials - H



            Metals and Materials for Research and Industry

            Goodfellow supplies metals, polymers, ceramics and other materials to meet the research, development and specialist production requirements of science and industry worldwide.

            This interactive Catalogue lists all our standard products. You can buy all of them online but if you cannot find exactly what you need, please contact us.


            H - Grade
            H14 - Temper
            H32 - Temper
            Hafnium ( Hf )
            Hafnium > 0.2% - Condition
            Hafnium Carbide ( HfC )
            Hafnium Diboride ( HfB2 )
            Hafnium Hydride ( HfH2 )
            Hafnium Oxide ( HfO2 )
            Halar - Ethylene-Chlorotrifluoroethylene copolymer ( E-CTFE )
            Half Hard - Temper
            Half-round Closed At One End - Condition
            Hard - Temper
            Hastelloy® B - Corrosion Resistant Alloy ( Ni62/Mo28/Fe 5/Cr/Mn/Si )
            Hastelloy® B-2 ( Ni68/Mo28/Fe 2/Cr 1/Co 1 )
            Hastelloy® B-3 ( Ni65/Mo28.5/Cr 1.5/Fe 1.5/(Co + Mn + W ) 3.5max )
            Hastelloy® C - Hastelloy® C276 - Heat Resisting Alloy ( Ni57/Mo17/Cr16/Fe/W/Mn )
            Hastelloy® C-22 ( Ni59/Cr22/Mo13/Fe 3/W 3 )
            Hastelloy® C276 - Heat Resisting Alloy ( Ni57/Mo17/Cr16/Fe/W/Mn )
            Hastelloy® X ( Ni49.5/Cr22/Fe18/Mo 9/Co 1/W )
            Havar® - High-Strength Non-Magnetic Alloy ( Co42.5/Cr20/Ni13/Fe/W/Mo/Mn )
            Haynes® 230 alloy ( Ni62/Cr22/W 14/Mo 2 )
            Heat Sealable - Minimum 130°C - Grade
            Heat shrink temperature - 330°C - 400°C
            Heat Stabilised - Condition
            Heat Stabilizer Only - Additives
            Heat-Shrinkable Tubing - 0.65mm Minimum I/D
            Heat-Shrinkable Tubing - 0.93mm Minimum I/D
            Heat-Shrinkable Tubing - 1.6mm Minimum I/D
            Heat-Shrinkable Tubing - 3.7mm Minimum I/D
            Heat-Shrinkable Tubing - 4.4 mm Minimum I/D
            Heat-Shrinkable Tubing - 4.5mm Minimum I/D
            Heat-Shrinkable Tubing - 5.7mm Minimum I/D
            Hecnum® - Constantan® - Resistance Alloy ( Cu55/Ni45 )
            Hexafluoropropylenevinylidenefluoride copolymer ( FKM )
            Hexagonal - Phase
            Hiduminium® - Dural® - Aluminium/Copper/Magnesium ( Al95/Cu 4/Mg 1 )
            High (>140g/in3) - Linear Density
            High Density Calcium Silicate ( Ca2SiO4 )
            High Permeability Magnetic Alloy ( Ni80/Fe15/Mo 5 )
            High Purity
            High Temperature Black Copper Oxide - Coating
            High Tenacity - Condition
            High Viscosity - Condition
            Hollow - Condition
            Holmium ( Ho )
            Homopolymer - Condition
            Honeycomb
            HOPG - ZYH - Grade
            Hostaflon - Polytetrafluoroethylene filled with Glass ( PTFE 25% GF )
            Hostaflon ET - Ethylene-Tetrafluoroethylene Copolymer ( ETFE )
            Hostaflon FEP - Fluorinated Ethylene Propylene Copolymer ( FEP )
            Hostaflon TF - Polytetrafluoroethylene ( PTFE )
            Hostaform - Polyoxymethylene - Copolymer ( Acetal - Copolymer POMC )
            Hostalen GUR - Polyethylene - U.H.M.W. ( UHMW PE )
            Hostalen HD - Polyethylene - High density ( HDPE )
            Hostalen PP - Polypropylene ( PP )
            Hostalit - Polyvinylchloride - Unplasticised ( UPVC )
            Hostaphan - Polyethylene terephthalate ( Polyester, PET, PETP )
            Hot Isostatic Pressed - Condition
            Hot Pressed - Condition
            Hot Rolled (Black) - Condition
            Hot Rolled - Condition
            HS40 - Grade
            HT - Grade
            Hydrogel - Polyacrylamide/acrylate ( Hydrogel )

            Index